Temperature/Humidity.

Both temperature and humidity matters, in aiding the growth of plants in any environment. If they are big enough, like trees and bushes both big and small, they will adapt, not because they want to, but because they have to. All of the trees and bushes you see, eventually grew and adapted to the weather changes, and you see this in the city, suburbs, and the countryside.

In places where it snows heavily in winter months, or even has that chill in the air, those trees and bushes wil adapt. Those same trees and bushes will adapt, in extremely hot temperatures also. What may influence lots of their growth is the humidity as well, and much of their adaptation is due to getting rain every now and again. They’ll be in the sun all year, but rain only arrives in short instances; some more than others. When I say short instances, I don’t mean only raining once a month. Some places that might be true, but generally, you will see it rain several times monthly, for certain areas more than others. Seattle is a place known for being somewhat gloomy and rains a lot.

I’ll focus on humidity first, despite the order of the topics in the title. You’ll see why I did it this way, in a moment. I may alternate from time to time, so bear with me.

When looking at indoor plants, you need to keep both in mind, when looking for your plants to grow properly, you need to monitor the humidity. Humidity may be both good, and bad, for plants. I’ll tell you why this is.

Humidity is designated in three or four categories, depending on your applications. If you have pets and plants, you can use the designated labels often found on humidity gauges found in pet stores (see hacks), which are desert, moderate, and tropical. For most people, the humidity gauges found in hardware stores and other outlets, you have designations such as very dry, dry, normal, humid, and very humid. Clearly, you know the equivalents for each, but how the humidity affects you, may affect some of your plants in a similar fashion.

For some plants, unless they are labeled tropical plants, you won’t have too many problems in normal conditions, and they will grow, especially if the temperature is good. In your home, if you can walk around comfortably with little to nothing on, that may be an indication of how comfortable some plants can be also. This isn’t the case for all plants, because some can handle very dry humidity, such as succulents and cacti.

The humidity does affect the temperature, which is why we often see things like, “real feel” temperature, or we would see and/or hear, “but it feels like”, which I personally hate, but there’s a purpose behind it. It does vary, so don’t think that hot temperatures always has high humidity, or cold temperatures always has low humidity. It’s not always the case. Just look at some examples in the United States, with Arizona and Florida, where Arizona, and many areas similar, like some parts of Texas, Nevada, New Mexico, and so on, may have low humidity, but the temperature can reach high in the triple digits at times. This is often referred to as a, “dry heat“. Florida is different, where the humidity can be in very high amounts, along with the temperatures. This is most likely because of the build of that state, where it’s a peninsula, pretty much surrounded more by water. You can look at the Northern areas like the New England areas, and New York state for example, where in the winter months, you will have colder temperatures, but the humidity may not be as low as you would expect. Why? Well, cold weather and low humidity (dry air) seem to go hand-in-hand. That cold weather can still retain quite a bit of moisture, especially when nearest to bodies of water, and intensify precipitations, such as snowfall, and other kinds of storms.

This part is much harder to explain, since I’m mostly referencing conditions indoors with plants.

For my indoor plants, the temperature does matter, because in warmer weather, it can be dry, due to other factors, such as being several floors above ground level. Believe it or not, this can affect your home’s level of humidity. You may have to adjust it for personal comfort, and for the plants’ comfort. In some instances, you will need a humidifier, or something a bit more heavy duty, like an evaporative air cooler. This may be needed, especially if you are in an apartment, where the heating system can be a bit out of your control. I known this, and I experienced some plants drying up, because the heat was so much, it dried the plants out, and the soil it was in. It’s clear from that, the plants could not recover, no matter how hard I or my mother tried to recover them. This happened when me and my mom visited her brother overseas, for two weeks.

Temperature and humidity goes hand in hand, because it can make or break some plants. Some plants can be fickle, and want to be in a perfect setting, where the humidity isn’t too high nor too low, and the temperature is also not too hot nor too cold. I’ve experienced this with many plants, which is unfortunate, but it’s a learning experience like everything else.
If you have the plants in the right environments, open air, or closed, you’ll aid in their growth, along with other factors, such as lighting. All of this helps, but what’s more important, in these scenarios? Lighting? Mediums? Water? Temperature? Humidity? Actually, it’s all of the above, and it’s not the same for all plants either, as most of us that have plants already know this to be true. For this journal, temperature and humidity will matter more here, because it’s the topic of this discussion.

Trays.

I cannot say much about this topic just yet, because I’ve only used trays for one application, so far. It’s not to say I cannot discuss my experience with using them, because I will.
I’ve used trays for easier hydration for my plants, but just know I use this method for a handful of plant varieties, not just carnivorous plants.

I know that the humidity tray method is often used, especially when the humidity is somewhat low around the plants. This involves trays filled with water and little rocks, pebbles, or gravel. Some are quite similar to aquarium pebbles or gravel; but it’s not to say that they cannot be used in place of these little rocks, pebbles, or gravel, because that’s what I’m using currently.

Trays can be used for a multitude of uses. Some are used for propagation, and some are used for long periods of hydration so that it’s not needed to constantly or frequently watering the plants.

In using these trays for watering plants, they obviously water from the bottom, which means that the top won’t be included in this process. This means, that it will require a top watering, or a spraying, to get the tops of the plants watered, which is fine, because whatever doesn’t touch the plants, will end up in the trays instead.

Some trays are meant for more than just holding water. Some may be used for other purposes, such as propagation, seeding, and just for keeping plants organized in a neat setup.

This is what you see with trays where people are seeding, and use them to space out their seeds for them to grow without being clustered and the roots potentially wrapping around other roots of other seeds beginning to root in that area. If it’s one or two, it’s not that big of a deal, but if it’s maybe five or more, then it can be an issue, if they are growing into separate plants. Which is why this can be a good solution to prevent that.

Some trays can be used for propagations, and growing moss. When looking at the process of growing microgreens, it’s not much different on the surface as growing live moss. (There may be more to this, so when I do find out, I’ll discuss it later.) Just have them in water, and have the tray covered. The tray can be one that has some partition between the outer tray and the plants intended for growth, where the water will go to the bottom of the tray, and hydrate and nourish the plants from the bottom. The top will be receiving any air and while covered, it will get the water evaporating and rising to the lid, and comes down on the tops of the plants. This way everything gets hydrated, but also humidity to accelerate that growth, which you see happen with plants in terrariums. For those that have holes in the lids, that’s for some of the air to escape, and eventually some of that moisture will also escape. Now, this will result in needing to refill the trays more often, but it’s good for preventing algae growth.

This isn’t a topic that I know much about. I’m still learning about topics like microgreens, and even growing live moss. The latter, I’ve tried, and it’s still in progress.

There are various uses for trays, besides organizing. When it comes to plants, you know of some, and other creative ways to make things better. Over time, I’ll find out more, to show you what I find.